All featured product 10% off with TechnoAccess 10

Shop Now


Brand Name: comfast

With Modem Function: No

Origin: Mainland China

Type: WireLess

Wi-Fi Supported Frequency: 2.4G

2.4G Wi-Fi Transmission Rate: 300 Mbps

Function: Firewall

Certification: NONE

Max. LAN Data Rate: 300Mbps

Standards And Protocols: Wi-Fi 802.11b

Standards And Protocols: Wi-Fi 802.11g

Standards And Protocols: Wi-Fi 802.11n

Wi-Fi Transmission Standard: 802.11b

Package: Yes

Supports WDS: Yes

LAN Ports: 1

Supports WPS: No

Application: OUTDOOR

CF-E314N V2: Wireless Amplificador comfast cpe

Certification: ISO/FCC/CE

Comfast: Wifi repeater outdoor wireless cpe nanostation

outdoor: Wifi Access Point CF-E314N V2 CPE


Wireless Protocol: 802.11b,802.11g,802.11n

720P Cameras support: 720P*8

960P Cameras support: 960P*6

1080P Cameras support: 1080P*4

Range: 1-5km in without obstacles situation

Max. LAN Data Rate: 300Mbs

Choice: yes

semi_Choice: yes

COMFAST 3-5KM Long Distance Transmission 300Mbps 2.4GHz Outdoor Wireless Bridge WiFi CPE Access Point Dual 2*14dBi Antenna Nanostation CF-E314NV2

Note: 3-5KM requires 2pcs CPE be set point to point as wifi bridge(No obstacles), 1pc CPE can not reach this distance.


1. Suitable for wireless signal transmission in security monitoring projects.

2. Suitable for the transmission of monitoring projects in scenic spots, ports, oil fields, construction sites, etc.

3. Wireless CPE waterproof, lightning protection, high temperature resistance, working temperature:-40℃-55℃.

4. Using Qualcomm QCA9531 650Mhz chipset, great stability and functionality, also supports a fast transmission rate of 300Mbps.

5. Antenna: Built-in 2*14dBi Antenna

6. IEEE802.11b/g/n Wireless Standard

7. AP/ Wireless Client/ Repeater Mode

8. IP65 waterproof

High Power Outdoor  WiFi Transmission Bridge

WiFi Transmission/ Security Monitoring/ Outdoor WiFi Coverage/ WiFi Amplifier

8 Advantages Quality Assurance

1. 2*14dbi Antenna

2. Professional Outdoor Protection

3. Qualcomm Chip High Quality

4. Built-in Amplifier Power Chipset

5. WDS Technology

6. Easy Set-up

7. No Crack WiFi Hide SSID

8. Four Modes Multi FunctionsComprehensive protection to against severe outdoor environments

Precise structural design provides the ability to handle different kinds of rugged surroundings

Lighting Protection/ Waterproof/ Dustproof/ Antifreeze/ High-Temperature Resistant/ Antioxidant/ Resistance to extrusion/ ShockproofLow Temperature Protection

lt can support work and start up under low temperature.Qualcomm Chip Perfect Performance

As Qualcomm's global strategic partner, COMFAST productsall use Qualcomm chipset, because we believe that QUALCOMM holds the high performance highland around the world.High Gain Antenna, Long distance stability

Ensure stable transmission, no delay, no stagnation.More channels Less interference

lt provides more optional channels. And support channel automatic selection. Substantially reduce the interference. From same channel when transfer signal. (2.4GHz band only 3 channels non interfering each other, and other channels are narrow and congested.)48VPOE Power Supply, Reduce network costs

Toggle the switch to the left, connect a networkcable to supply power to the surveillance camera, and realize view transmission, saving engineering cost and power supply troubles!

No external power supply required/ Only one network cable/ Safe and simpleHidden SSID Safety WiF

Support SSID hiding, solve network problems, and ensure project stabilityPowerful Sinmax Software OS

SINMAX is a multifunctional software OS and it is very easy to do settings upApplicable scene

Elevator/ Community/ Driving school/ Factory/ Scenic spot/ SiteElevator Monitoring ApplicationConnect Application Diagram

Point to Point Connection Diagram

Multiple cameras connecting way 1: Connect the camera to the switch, then connect withCOMFAST will transmit the data through two CPE.

Multiple cameras connecting way2: lf the distance among the cameras is so far,each camera isconfigured with double cPE.The control center connect CPE with AP mode through the switch,then connect with the DVR.Point to Multi-point Connection Diagram

lf the angle between camera and control center is within 60 , there can consider one pointto multi point connection. It can reduce CPEs with the transimitting mode, which can save project cost a lot. Pls pay attention that it has to be meet the angle and brandwith requirements. (In wireless monitoring transmission, we suggest you to use above way to do connection.Pls pay attention that the transmission angle for the device is 60°)Easy to install and maintain

stainless ties are fixed installation without installation toolsConstruction assistant

Four signal strength indicator for easy construction adjustment When the signal indicator is weak, it may be set to be alignedor too far away. Please adjust according to the signal indicator. (Note: When the signal strength is very weak, the device may be misaligned or the distance is too far. Please adjust according to the signal indicator.)Packing List

CPE; Stainless ties; POE Power Supply Power cable; Quick Installation Certificate; Guide; Warranty Card


Q1. Does it support APP management?

A: No, our device is managed through the HTTP WEB page, and the default address is

Q2. How many pieces of CPE are included in the package?

A: There are 2 options in the link, if you need 2pcs CPE, please order "2pcs Cheaper" option.

(Note: Long distance wireless transmission requires at least 2pcs CPE)

Q3. Can the coverage of the antenna reach 3KM?

A: No, this is a directional antenna, and 3KM is a directional transmission distance, which can only be achieved if two CPEs are set to point-to-point wireless bridge mode and there are no obstacles in between. Other modes cannot refer to this distance.

Q4. Why the transmission distance is less than 3KM?

A: The transmission distance is affected by many factors such as weather, local network conditions, buildings, trees, etc., so it may not be able to reach 3KM, I hope you can understand.

Q5: What power supply are supported?

A: This CPE equipped with 48V 0.32A POE power supply, supporting 802.3af/802.3at compatible power supply.

Q6. The CPE is not powered, power light is off.

A: Please check whether the connection between POE and the device is correct. If the connection is correct but the CPE is still not powered, please change the POE and RJ45 Lan cable to try.

Power POE---connected with CPE WAN port

CPE Lan Port---connected with laptop

Customer Reviews

Be the first to write a review
Translation missing: